Spider Covers For Trailers

Trailer Covers That Make Your Everyday Jobs Easier

Smart Tarp Mesh Large Box Trailer Feat
We have a wide range of products to choose from
About this Product

Tarps & Covers for Your Trailer

Spider Tarp Trailer covers are manufactured in either waterproof 230gsm PE or Spider-Mesh™ 350gsm PVC coated fabrics. Supplied in various shapes and sizes, they can be used with open and cage box trailers from 6’ x 4’ to 8’ x 5’ and larger sizes where you don’t need any cover overhang.

Each trailer cover has eight adjustable attachment cords with Spider-Lock™ hooks permanently fitted on each corner and midway along each edge. In addition, our larger trailer covers have an extra eight brass eyelets positioned midway between the attachment cords to provide additional securing points. If you need extra security, we recommend using 120cm Spider-Cord™ with Carabiner attachment cords which can be purchased separately or in multi packs of 4x 60 cm, similar in length to the permanently attached cords.

Sci About Img Internal Paint Bg
Spider Cover trailers

The adjustable attachment cords on our trailer tarps have a recommended elastic working range of up to 100cm ensuring that your high and uneven loads can be securely covered. The long working length of the attachment cords is particularly useful on cage trailers where they can either be secured to a convenient point on the cage mesh or to your trailer’s tie down bars. Spider-Lock™ hooks have a 30mm opening ensuring that they fit wide diameter tie down bars that are common on newer trailers.

The Spider Tarp multi-point attachment design provides countless securing options when compared to other trailer cargo nets. Spider-Lock™ hooks enable each attachment cord to be quickly located on your side rails or other convenient attachment points and adjusted to the perfect length and tension. Covering and uncovering your loads is so much easier and faster.

Unlike typical “hairnet” trailer cargo nets, each attachment cord can be lightly secured to achieve the correct cover position and then quickly tensioned without having to reposition the hooks. This creates straight pull attachment cords that replicate a rope tie down – but without the hassle of having to tie knots or use ratchets. And when it comes to uncovering your load, attachment cords can be individually and quickly removed allowing partial access to your load without losing the tension on the remainder of your trailer cover.

Spider Covers Trailers
Specific Product Options
Australia
Frequently Asked Questions

Our cargo covers are designed for a general type of vehicle and trailer rather than a specific make or model. This means everyone can find a Spider Tarp cover to suit their vehicle!

Most tray backs are 1.86m (6’) in width with only minor variation. Our load covers are designed to hang down 15cm (6”) on either side of a standard width tray with a flat load. This allows sufficient overhang to easily position the cover plus room for the adjustable Spider-Lock™ hooks and elastic attachment cords to attach to the side rails.

The standard tray length for a Dual Cab is 1.86m (6’) and 2.45m (8’) for a Single Cab, but the lengths can vary. Spider Tarp covers are designed for standard tray lengths, so they may be a little shorter or longer than your tray depending on the vehicle or tray manufacturer.

We understand that you may have unique cover requirements. You can have the benefits of the Spider-Lock™ attachment system by purchasing a generic tarp and a quantity of Spider-Cords™ with Carabiner. Just attach the carabiners to either the tarp eyelets or D Rings to create your own Spider cover making sure you have sufficient Spider-Cords™ to properly secure the cover.

All our PE and solid PVC covers are waterproof. As our Pickup Truck load covers are designed to drape on the inside of the tub, you may need to lift the load off the bottom of the floor to prevent contact with any pooling water.

If you are not concerned about water or dust ingress, or visibly hiding your load, Spider-Mesh™ has some unique benefits. While having great strength and durability, being an open weave means it drapes more easily over uneven loads and is far less prone to wind flap than solid covers.

We stand behind all our products and offer a 12-month manufacturer’s warranty against faults. While we take every care to ensure that you receive the best quality product, if for any reason you have a problem, please contact us and we’ll do everything we can to rectify your issue as quickly as possible.

Logo

Share This

Select your desired option below to share a direct link to this page.
Your friends or family will thank you later.

Share Img@2x