We have a wide range of products to choose from
About this Product

Ute Tarps and Tray Covers

Spider Tarp ute tray covers are manufactured in either waterproof PE, Spider-Mesh™ PVC or waterproof PVC coated fabrics. Designed to overhang 15cm on the sides of standard ute trays, you won’t have the problems positioning our ute tray covers that you typically do on other covers. The overhang of our ute tray covers also provides optimum distance for the adjustable attachment cords to be secured and tensioned to your ute’s side rails.

Better constructed, more durable and delivering greater functionality than generic ute tray covers, our ute tarps are easily attached and removed with no tangling. Our ute tarps and mesh covers can withstand heavier and higher loads than store-bought ute net covers and accessories.

Available in a range of styles and materials, our ute tray covers are designed to fit snugly over the top of your ute’s tray, making them easy to install and remove when needed. Our tray covers can provide either a weatherproof cover or mesh cover for the cargo area, protecting it from water, dirt, dust, and other debris. 

Sci About Img Internal Paint Bg
Spider Cover Utes

The adjustable attachment cords on our ute cargo nets and covers have a recommended elastic working range of up to 100cm ensuring that high and uneven loads can be securely anchored. In addition, our ute covers have two D-Rings on their front edge to provide additional tie down points allowing attachment to your ute tray headboard. These are particularly useful for loads that might protrude above your ute cabin or to provide a semi-permanent attachment so that cover is always conveniently positioned centrally over your ute tray.

The Spider Tarp multi-point attachment design provides countless securing options. Spider-Lock™ hooks enable each attachment cord to be quickly located on your ute’s side rails and adjusted to the perfect length and tension making covering and uncovering loads so much easier and faster. Attachment cords are located inboard of the cover corners to allow for corner roll bars and the typical location of tie down side rails.

Unlike single perimeter bungee “hairnet” covers, each attachment cord on our mesh cargo nets can be lightly secured to achieve the correct cover position and then quickly tightened without having to reposition the hooks. This creates straight pull attachment cords that replicate a rope tie down – but without the hassle of having to tie knots or use ratchets. And when it comes to uncovering your load, attachment cords can be individually and quickly removed allowing partial access to your load without loosing the tension on the remainder of your cover.

Spider Covers Utes
Specific Product Options
Australia
Frequently Asked Questions

Our cargo covers are designed for a general type of vehicle and trailer rather than a specific make or model. This means everyone can find a Spider Tarp cover to suit their vehicle!

Most tray backs are 1.86m (6’) in width with only minor variation. Our load covers are designed to hang down 15cm (6”) on either side of a standard width tray with a flat load. This allows sufficient overhang to easily position the cover plus room for the adjustable Spider-Lock™ hooks and elastic attachment cords to attach to the side rails.

The standard tray length for a Dual Cab is 1.86m (6’) and 2.45m (8’) for a Single Cab, but the lengths can vary. Spider Tarp covers are designed for standard tray lengths, so they may be a little shorter or longer than your tray depending on the vehicle or tray manufacturer.

We understand that you may have unique cover requirements. You can have the benefits of the Spider-Lock™ attachment system by purchasing a generic tarp and a quantity of Spider-Cords™ with Carabiner. Just attach the carabiners to either the tarp eyelets or D Rings to create your own Spider cover making sure you have sufficient Spider-Cords™ to properly secure the cover.

All our PE and solid PVC covers are waterproof. As our Pickup Truck load covers are designed to drape on the inside of the tub, you may need to lift the load off the bottom of the floor to prevent contact with any pooling water.

If you are not concerned about water or dust ingress, or visibly hiding your load, Spider-Mesh™ has some unique benefits. While having great strength and durability, being an open weave means it drapes more easily over uneven loads and is far less prone to wind flap than solid covers.

We stand behind all our products and offer a 12-month manufacturer’s warranty against faults. While we take every care to ensure that you receive the best quality product, if for any reason you have a problem, please contact us and we’ll do everything we can to rectify your issue as quickly as possible.

Logo

Share This

Select your desired option below to share a direct link to this page.
Your friends or family will thank you later.

Share Img@2x